My first CV. Created using the AltaCV template.
\begin
Discover why over 20 million people worldwide trust Overleaf with their work.
%%%%%%%%%%%%%%%%%
% This is an example CV created using altacv.cls (v1.1, 21 November 2016) written by
% LianTze Lim (liantze@gmail.com), based on the
% Cv created by BusinessInsider at http://www.businessinsider.my/a-sample-resume-for-marissa-mayer-2016-7/?r=US&IR=T
%
%% It may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.3
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.3 or later is part of all distributions of LaTeX
%% version 2003/12/01 or later.
%%%%%%%%%%%%%%%%
%% If you want to use \orcid or the
%% academicons icons, add "academicons"
%% to the \documentclass options.
%% Then compile with XeLaTeX or LuaLaTeX.
% \documentclass[10pt,a4paper,academicons]{altacv}
\documentclass[10pt,a4paper]{altacv}
%% AltaCV uses the fontawesome and academicon fonts
%% and packages.
%% See texdoc.net/pkg/fontawecome and http://texdoc.net/pkg/academicons for full list of symbols.
%% When using the "academicons" option,
%% Compile with LuaLaTeX for best results. If you
%% want to use XeLaTeX, you may need to install
%% Academicons.ttf in your operating system's font %% folder.
% Change the page layout if you need to
\geometry{left=1cm,right=9cm,marginparwidth=6.8cm,marginparsep=1.2cm,top=1cm,bottom=1cm}
% Change the font if you want to.
% If using pdflatex:
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage[default]{lato}
% If using xelatex or lualatex:
% \setmainfont{Lato}
% Change the colours if you want to
\definecolor{VividPurple}{HTML}{2F9E43}
\definecolor{SlateGrey}{HTML}{2E2E2E}
\definecolor{LightGrey}{HTML}{666666}
\colorlet{heading}{VividPurple}
\colorlet{accent}{VividPurple}
\colorlet{emphasis}{SlateGrey}
\colorlet{body}{LightGrey}
% Change the bullets for itemize and rating marker
% for \cvskill if you want to
\renewcommand{\itemmarker}{{\small\textbullet}}
\renewcommand{\ratingmarker}{\faCircle}
%% sample.bib contains your publications
\addbibresource{sample.bib}
\begin{document}
\name{CESAR LAURA}
\tagline{ }
% Cropped to square from https://en.wikipedia.org/wiki/Marissa_Mayer#/media/File:Marissa_Mayer_May_2014_(cropped).jpg, CC-BY 2.0
\photo{3.5cm}{cesar}
\personalinfo{%
% Not all of these are required!
% You can add your own with \printinfo{symbol}{detail}
\email{clauram@ulasalle.edu.pe}
\mailaddress{Urb. Chapi Chico Mz A Lt 2}
% \phone{+33666312478}
\phone{+51998844441} \location{Arequipa, Perú} \quad{Age: 25 }
% \github{} % I'm just making this up though.
% \orcid{orcid.org/0000-0000-0000-0000} % Obviously making this up too. If you want to use this field (and also other academicons symbols), add "academicons" option to \documentclass{altacv}
}
%% Make the header extend all the way to the right, if you want. Extend the right margin by 8cm (=6.8cm marginparwidth + 1.2cm marginparsep)
\begin{adjustwidth}{}{-8cm}
\makecvheader
\end{adjustwidth}
%% Provide the file name containing the sidebar contents as an optional parameter to \cvsection.
%% You can always just use \marginpar{...} if you do
%% not need to align the top of the contents to any
%% \cvsection title in the "main" bar.
\cvsection[page1sidebar]{PROFESSIONAL EXPERIENCES}
\cvevent{Software Analyst, Web desing}{AmicaSoft}{September 2017 -- July 2018} {Arequipa}
\begin{itemize}
\item Design various graphic elements for web pages, merchandising Photoshop and Illustreitor.
\item Design web pages in XD Adobe, Illustreitor.
\item Customer search.
\item I got clients offering a solution to their needs, I got good contacts.
\end{itemize}
\divider
\cvsection{projets universitaires}
\cvevent{Construction and designer of a prototype rescue robot }{LARVIC\\
(Research group in the line of industrial automation, Robotics and Computational Vision) - Translated to English}{Summer 2014 } {Arequipa}
Robot of rescue, is a project of the Larvic for a program of development of Robots for the use in cases of natural disaster, especially for cases of terromotos, of that way to be able to look for and to rescue people. This project was funded by CONCYTEC (National Council of Science, Technology and Technological Innovation) in Peru.\\
\begin{itemize}
\item I was in charge of the evaluation and selection of servomotors, DC motors and materials. Calculating torques, strength and resistances. \\ \item Design the structure of the first prototype of the robot in charge of navigating the sides of the disaster.\\
Using: Mathematical properties, Autocat.
\item Design and construction of the arm with 3 degrees of movement.
Using: Autocat.\\
\end{itemize}
\divider
\cvevent{LARC-SEK Season 2015}{
(Latin American Robotics Competition - The IEEE Standard Education Kits) - Translated to English}{ 2015 } {Brasil}
In the SEK category where I participate, to meet the challenge of the season, which consisted of rescuing "people" by selecting them with an autonomous robot, where the robot had You navigate the map by searching, selecting and rescuing. I was responsible for:
\begin{itemize}
\item Programming the source code.
Using: LeJOS EV3(framework in Java).
\item Supporting to construccion of robot with LEGO.
\item Supporting in the strategy.
\item Supporting in the writing of TDP.
\end{itemize}
\divider
\divider
\divider
\divider
\cvevent{LARC-SEK Season 2016}{
(Latin American Robotics Competition - The IEEE Standard Education Kits) - Translated to English}{ 2016 } {Brasil}
In this season the competition was with the same challenge, so we designed 2 main strategies. I was responsible for:
\begin{itemize}
\item Design the second strategy.
\item Programming the source code.
Using: LeJOS EV3(framework in Java) and LEGO Mindstorms EV3.
\item Construccion of robot with LEGO.
\end{itemize}
\divider
\cvevent{LARC-SEK Season 2017}{
(Latin American Robotics Competition - The IEEE Standard Education Kits) - Translated to English}{ 2017 } {Brasil}
In this section I change the challenge for a maze, where the robot must pick up people and take them to a central module, similar to an intelligent limousine. I was responsible for:
\begin{itemize}
\item Design simple strategy but effective.
\item Programming of an alternative robot, with simple functions but fast action.
Using: LeJOS EV3(framework in Java) and LEGO Mindstorms EV3.
\item Supporting in construccion.
Using: LEGO Digital Designer.
\end{itemize}
\divider
\cvsection{AWARDS AND LEADERSHIP}
\begin{itemize}
\item Staying among the 12 best in Latin American and Brazilian Robotics Competition (LARC CBR), 2015.
\item Get 9th place in Latin American and Brazilian Robotics Competition (LARC CBR), 2016.
\item Participant in StarUp Peru with AmicaSoft(software company), 2016.
\item Staying in the semifinals in Latin American and Brazilian Robotics Competition (LARC CBR), 2017.
\item Participant in BMC(busnies model competicion) with AmicaSoft(software company), 2017.
\item Play in concerts since 2018.
\end{itemize}
\divider
\cvsection{Qualities}
% Adapted from @Jake's answer from http://tex.stackexchange.com/a/82729/226
% \wheelchart{outer radius}{inner radius}{
% comma-separated list of value/text width/color/detail}
\wheelchart{1.5cm}{0.5cm}{%
23/13em/accent!80/Creative,
13/9em/accent!35/Charismatic,
10/12em/accent!10/Empathic,
10/12em/accent!35/Commitment,
23/8em/accent!75/Truth,
10/9em/accent!40/Cooperation,
13/8em/accent!50/Adaptability}
\end{document}