Shrabani's résumé
Autor
Shrabani Panigrahi
Letzte Aktualisierung
vor 6 Jahren
Lizenz
Creative Commons CC BY 4.0
Abstrakt
I have taken reference from the AltaCV template and modified it according to my requirements.
I have taken reference from the AltaCV template and modified it according to my requirements.
%%%%%%%%%%%%%%%%%
% * <shrabanipanigrahi@gmail.com> 2018-06-25T16:57:48.502Z:
%
% ^.
% This is an sample CV template created using altacv.cls
% (v1.1.3, 30 April 2017) written by LianTze Lim (liantze@gmail.com). Now compiles with pdfLaTeX, XeLaTeX and LuaLaTeX.
%
%% It may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.3
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.3 or later is part of all distributions of LaTeX
%% version 2003/12/01 or later.
%%%%%%%%%%%%%%%%
%% If you need to pass whatever options to xcolor
\PassOptionsToPackage{dvipsnames}{xcolor}
%% If you are using \orcid or academicons
%% icons, make sure you have the academicons
%% option here, and compile with XeLaTeX
%% or LuaLaTeX.
% \documentclass[10pt,a4paper,academicons]{altacv}
%% Use the "normalphoto" option if you want a normal photo instead of cropped to a circle
% \documentclass[10pt,a4paper,normalphoto]{altacv}
\documentclass[10pt,a4paper]{altacv}
%% AltaCV uses the fontawesome and academicon fonts
%% and packages.
%% See texdoc.net/pkg/fontawecome and http://texdoc.net/pkg/academicons for full list of symbols.
%%
%% Compile with LuaLaTeX for best results. If you
%% want to use XeLaTeX, you may need to install
%% Academicons.ttf in your operating system's font
%% folder.
% Change the page layout if you need to
\geometry{left=1cm,right=9cm,marginparwidth=6.8cm,marginparsep=1.2cm,top=1.25cm,bottom=1.25cm,footskip=2\baselineskip}
% Change the font if you want to.
% If using pdflatex:
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage[default]{lato}
% If using xelatex or lualatex:
% \setmainfont{Lato}
% Change the colours if you want to
\definecolor{darkblue}{HTML}{00394d}
\definecolor{Mulberry}{HTML}{005c99}
\definecolor{SlateGrey}{HTML}{000000}
\definecolor{LightGrey}{HTML}{333333}
\colorlet{heading}{darkblue}
\colorlet{accent}{Mulberry}
\colorlet{emphasis}{SlateGrey}
\colorlet{body}{LightGrey}
% Change the bullets for itemize and rating marker
% for \cvskill if you want to
\renewcommand{\itemmarker}{{\small\textbullet}}
\renewcommand{\ratingmarker}{\faCircle}
%% sample.bib contains your publications
\addbibresource{sample.bib}
\begin{document}
\name{Shrabani Panigrahi}
\tagline{PDM,PLM,CAD Engineer}
\photo{3cm}{MYPIC}
\personalinfo{%
% Not all of these are required!
% You can add your own with \printinfo{symbol}{detail}
\email{shrabanipanigrahi@gmail.com}
\phone{90080 62746}
%% You MUST add the academicons option to \documentclass, then compile with LuaLaTeX or XeLaTeX, if you want to use \orcid or other academicons commands.
% \orcid{orcid.org/0000-0000-0000-0000}
}
%% Make the header extend all the way to the right, if you want.
\begin{fullwidth}
\makecvheader
\end{fullwidth}
%% Provide the file name containing the sidebar contents as an optional parameter to \cvsection.
%% You can always just use \marginpar{...} if you do
%% not need to align the top of the contents to any
%% \cvsection title in the "main" bar.
\cvsection[page1sidebar]{Experience 4 years }
\cvevent{Product Design Engineer}{MBRDI}{Jan 2016 -- Present}{Bengaluru}
\begin{itemize}
\item Part number and BOM Structure creation
\item Creation and Releases of DCNs for various quality gates
\item 3D and 2D-Drawing data archiving for parts in UG NX
\item Design of flexible part for battery components in UG NX
\item Contacting supplier and co-ordinating with counterparts for correct data of parts
\item Positioning and stamping of parts with required Product phase
\item Understanding and solving discrepancies among various PDM tools
\item Hands on experience of the process flow and concerned components release in Daimler,Germany for various projects
\end{itemize}
\medskip
\divider
\medskip
\cvevent{Design Engineer}{Volvo Buses India Pvt Ltd}{May 2014 -- Dec 2015}{Bengaluru}
\begin{itemize}
\item Receive and respond to Costumer Adaptation request from market support team
\item Creation of "New Product Specification" sheet in terms of product features,documentation and maintenance of technical concepts for new projects
\item Support and create technical feasibility study for new product concept and convert them to system defined variant codes.
\item Creation and maintenance of Project Time-plan and follow up project GATEs as per time time plan.
\item Identify, collect\& deliver techno-commercial feasibility study of potential cost reduction ideas to program manager
\item Design and 2D drawing creation in CATIA \& BOM creation of different hatches and gas springs of the bus
\item Preparation of presentations and RFQ for supplier \& supplier selection process
\item Secure new parts \& their trials conducted in proto shop as per project time-plan
\item Coordination between Manufacturing, Purchase, Product Development and homologation for design change introduction in production line as per time-plan
\item Decision of making parts in-house or procurement from supplier
\item Study of production time at different workstations and sub-assemblies in production line
\end{itemize}
\medskip
\bigskip
\vspace{20mm}
\vspace{2mm}
\cvsection{Over-all Experience}
% Adapted from @Jake's answer from http://tex.stackexchange.com/a/82729/226
% \wheelchart{outer radius}{inner radius}{
% comma-separated list of value/text width/color/detail}
\wheelchart{1.5cm}{0.5cm}{%
5/8em/accent!30/{Project Management},
3/8em/accent!40/Process Planning,
7/8em/accent!60/PDM PLM,
5.5/10em/accent/Project Pre-Study,
3.5/6em/accent!50/CAD
}
\vspace{7mm}
\cvsection{Hobbies}
\cvtag{Logo Designing}
\cvtag{Digital Banners and Card designing}
\cvtag{Painting}
\cvtag{Product concept sketching}
\cvtag{Photography}
\cvtag{Traveling}
\cvtag{Cooking}
%% If the NEXT page doesn't start with a \cvsection but you'd
%% still like to add a sidebar, then use this command on THIS
%% page to add it. The optional argument lets you pull up the
%% sidebar a bit so that it looks aligned with the top of the
%% main column.
%%\addnextpagesidebar[-1ex]{page3sidebar}
\end{document}