% rasti_template.tex
%
% LaTeX template for creating an RASTI paper
%
% v1.3 relased 20 July 2023
%
%
% Copyright (C) Royal Astronomical Society 2023
% Authors:
% Peter Jones (OUP, adapted from mnras_template.tex, author Keith T. Smith (Royal Astronomical Society))
% Change log
%
% v1.0 November 2021
% Adapted from mnras_template.tex
% v1.1 February 2022
% rasti.bst updated to match output style for Geophysical Journal International
% v.1.2 April 2022
% minor updates to author instructions (word limit, contact adddress, keywords)
% v1.3 July 2023
% updated guidance on use of amssymb package
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Basic setup. Most papers should leave these options alone.
\documentclass[fleqn,usenatbib]{rasti}
% RASTI is set in Times font. If you don't have this installed (most LaTeX
% installations will be fine) or prefer the old Computer Modern fonts, comment
% out the following line
\usepackage{newtxtext,newtxmath}
% Depending on your LaTeX fonts installation, you might get better results with one of these:
%\usepackage{mathptmx}
%\usepackage{txfonts}
% Use vector fonts, so it zooms properly in on-screen viewing software
% Don't change these lines unless you know what you are doing
\usepackage[T1]{fontenc}
% Allow "Thomas van Noord" and "Simon de Laguarde" and alike to be sorted by "N" and "L" etc. in the bibliography.
% Write the name in the bibliography as "\VAN{Noord}{Van}{van} Noord, Thomas"
\DeclareRobustCommand{\VAN}[3]{#2}
\let\VANthebibliography\thebibliography
\def\thebibliography{\DeclareRobustCommand{\VAN}[3]{##3}\VANthebibliography}
%%%%% AUTHORS - PLACE YOUR OWN PACKAGES HERE %%%%%
% Only include extra packages if you really need them. Avoid using amssymb if newtxmath is enabled, as these packages can cause conflicts. newtxmatch covers the same math symbols while producing a consistent Times New Roman font. Common packages are:
\usepackage{graphicx} % Including figure files
\usepackage{amsmath} % Advanced maths commands
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%% AUTHORS - PLACE YOUR OWN COMMANDS HERE %%%%%
% Please keep new commands to a minimum, and use \newcommand not \def to avoid
% overwriting existing commands. Example:
%\newcommand{\pcm}{\,cm$^{-2}$} % per cm-squared
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%% TITLE PAGE %%%%%%%%%%%%%%%%%%%
% Title of the paper, and the short title which is used in the headers.
% Keep the title short and informative.
\title[Short title, max. 45 characters]{RASTI \LaTeXe\ template -- title goes here}
% The list of authors, and the short list which is used in the headers.
% If you need two or more lines of authors, add an extra line using \newauthor
\author[K. T. Smith et al.]{
Keith T. Smith,$^{1}$\thanks{E-mail: publications@ras.ac.uk (KTS)}
A. N. Other,$^{2}$
Third Author$^{2,3}$
and Fourth Author$^{3}$
\\
% List of institutions
$^{1}$Royal Astronomical Society, Burlington House, Piccadilly, London W1J 0BQ, UK\\
$^{2}$Department, Institution, Street Address, City Postal Code, Country\\
$^{3}$Another Department, Different Institution, Street Address, City Postal Code, Country
}
% These dates will be filled out by the publisher
\date{Accepted XXX. Received YYY; in original form ZZZ}
% Enter the current year, for the copyright statements etc.
\pubyear{2022}
% Don't change these lines
\begin{document}
\label{firstpage}
\pagerange{\pageref{firstpage}--\pageref{lastpage}}
\maketitle
% Abstract of the paper
\begin{abstract}
This is a simple template for authors to write new RASTI papers.
The abstract should briefly describe the aims, methods, and main results of the paper.
It should be a single paragraph not more than 250 words.
No references should appear in the abstract.
\end{abstract}
% Include between one and six keywords.
\begin{keywords}
keyword1 -- keyword2 -- keyword3
\end{keywords}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%% BODY OF PAPER %%%%%%%%%%%%%%%%%%
\section{Introduction}
This is a simple template for authors to write new RASTI papers.
See \texttt{rasti\_guide.tex}
for a full user guide.
All papers should start with an Introduction section, which sets the work
in context, cites relevant earlier studies in the field by \citet{Fournier1901},
and describes the problem the authors aim to solve \citep[e.g.][]{vanDijk1902}.
Multiple citations can be joined in a simple way like \citet{deLaguarde1903, delaGuarde1904}.
\section{Methods, Observations, Simulations etc.}
Normally the next section describes the techniques the authors used.
It is frequently split into subsections, such as Section~\ref{sec:maths} below.
\subsection{Maths}
\label{sec:maths} % used for referring to this section from elsewhere
Simple mathematics can be inserted into the flow of the text e.g. $2\times3=6$
or $v=220$\,km\,s$^{-1}$, but more complicated expressions should be entered
as a numbered equation:
\begin{equation}
x=\frac{-b\pm\sqrt{b^2-4ac}}{2a}.
\label{eq:quadratic}
\end{equation}
Refer back to them as e.g. equation~(\ref{eq:quadratic}).
\subsection{Figures and tables}
Figures and tables should be placed at logical positions in the text. Don't
worry about the exact layout, which will be handled by the publishers.
Figures are referred to as e.g. Fig.~\ref{fig:example_figure}, and tables as
e.g. Table~\ref{tab:example_table}.
% Example figure
\begin{figure}
% To include a figure from a file named example.*
% Allowable file formats are eps or ps if compiling using latex
% or pdf, png, jpg if compiling using pdflatex
\includegraphics[width=\columnwidth]{example}
\caption{This is an example figure. Captions appear below each figure.
Give enough detail for the reader to understand what they're looking at,
but leave detailed discussion to the main body of the text.}
\label{fig:example_figure}
\end{figure}
% Example table
\begin{table}
\centering
\caption{This is an example table. Captions appear above each table.
Remember to define the quantities, symbols and units used.}
\label{tab:example_table}
\begin{tabular}{lccr} % four columns, alignment for each
\hline
A & B & C & D\\
\hline
1 & 2 & 3 & 4\\
2 & 4 & 6 & 8\\
3 & 5 & 7 & 9\\
\hline
\end{tabular}
\end{table}
\section{Conclusions}
The last numbered section should briefly summarise what has been done, and describe
the final conclusions which the authors draw from their work.
\section*{Acknowledgements}
The Acknowledgements section is not numbered. Here you can thank helpful
colleagues, acknowledge funding agencies, telescopes and facilities used etc.
Try to keep it short.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section*{Data Availability}
The inclusion of a Data Availability Statement is a requirement for articles published in RASTI. Data Availability Statements provide a standardised format for readers to understand the availability of data underlying the research results described in the article. The statement may refer to original data generated in the course of the study or to third-party data analysed in the article. The statement should describe and provide means of access, where possible, by linking to the data or providing the required accession numbers for the relevant databases or DOIs.
%%%%%%%%%%%%%%%%%%%% REFERENCES %%%%%%%%%%%%%%%%%%
% The best way to enter references is to use BibTeX:
\bibliographystyle{rasti}
\bibliography{example} % if your bibtex file is called example.bib
% Alternatively you could enter them by hand, like this:
% This method is tedious and prone to error if you have lots of references
%\begin{thebibliography}{99}
%\bibitem[\protect\citeauthoryear{Author}{2012}]{Author2012}
%Author A.~N., 2013, Journal of Improbable Astronomy, 1, 1
%\bibitem[\protect\citeauthoryear{Others}{2013}]{Others2013}
%Others S., 2012, Journal of Interesting Stuff, 17, 198
%\end{thebibliography}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%% APPENDICES %%%%%%%%%%%%%%%%%%%%%
\appendix
\section{Some extra material}
If you want to present additional material which would interrupt the flow of the main paper,
it can be placed in an Appendix which appears after the list of references.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Don't change these lines
\bsp % typesetting comment
\label{lastpage}
\end{document}
% End of rasti_template.tex
