Zum Inhalt springen

Introduction

Two-column documents can be easily created by passing the parameter \twocolumn to the document class statement. If you need more flexibility in the column layout, or to create a document with multiple columns, the package multicol provides a set of commands for that. This article explains how use the multicol package, starting with this basic example:

\documentclass{article}
\usepackage{blindtext}
\usepackage{multicol}
\title{Multicols Demo}
\author{Overleaf}
\date{April 2021}

\begin{document}
\maketitle

\begin{multicols}{3}
[
\section{First Section}
All human things are subject to decay. And when fate summons, Monarchs must obey.
]
\blindtext\blindtext
\end{multicols}

\end{document}

 Open this multicols example in Overleaf


3 column example

To import the package, the line

\usepackage{multicol}

is added to the preamble. Once the package is imported, the environment multicols can be used. The environment takes two parameters:

  • Number of columns. This parameter must be passed inside braces, and its value is 3 in the example.
  • "Header text", which is inserted in between square brackets. This is optional and will be displayed on top of the multicolumn text. Any LaTeX command can be used here, except for floating elements such as figures and tables. In the example, the section title and a small paragraph are set here.

The text enclosed inside the tags \begin{multicols} and \end{multicols} is printed in multicolumn format.

Column separation

The column separation is determined by \columnsep. See the example below:

\documentclass{article}
\usepackage{blindtext}
\usepackage{multicol}
\setlength{\columnsep}{1cm}
\title{Second multicols Demo}
\author{Overleaf}
\date{April 2021}

\begin{document}
\maketitle

\begin{multicols}{2}
[
\section{First Section}
All human things are subject to decay. And when fate summons, Monarchs must obey.
]
\blindtext\blindtext
\end{multicols}

\end{document}

 Open this multicols example in Overleaf


A two column example

Here, the command \setlength{\columnsep}{1cm} sets the column separation to 1cm. See Lengths in LaTeX for a list of available units.

Unbalanced columns

In the default multicols environment the columns are balanced so each one contains the same amount of text. This default format can be changed by the starred environment multicols*:

\documentclass{article}
\usepackage{blindtext}
\usepackage{multicol}
\setlength{\columnsep}{1cm}
\title{Second multicols Demo}
\author{Overleaf}
\date{April 2021}
\begin{document}
\maketitle
\begin{multicols*}{3}
[
\section{First Section}
All human things are subject to decay. And when fate summons, Monarchs must obey.
]
\blindtext\blindtext
\end{multicols*}

\end{document}

 Open this multicols example in Overleaf


3 column demo

If you open this example on Overleaf you'll see that the text is printed in a column till the end of the page is reached, then the in continues in the next column, and so on.

Inserting floating elements

Floating elements (tables and figures) can be inserted in a multicolumn document with wrapfig and wraptable. The following LaTeX code fragment, which is not a complete LaTeX document, shows how to use floating elements. Please use the link below the code to open a full LaTeX document that you can compile on Overleaf.

\begin{multicols}{2}
[
\section{First Section}
All human things are subject to decay. And when fate summons, Monarchs must obey.
]

Hello, here is some text without a meaning.  This text should show what 
a printed text will look like at this place.
If you read this text, you will get no information.  Really?  Is there 
no information?  Is there.

\vfill

\begin{wrapfigure}{l}{0.7\linewidth}
\includegraphics[width=\linewidth]{overleaf-logo}
\caption{This is the Overleaf logo}
\end{wrapfigure}

A blind text like this gives you information about the selected font, how 
the letters are written and an impression of the look.  This text should
contain all...

\begin{wraptable}{l}{0.7\linewidth}
\centering
\begin{tabular}{|c|c|}
\hline
Name & ISO \\
\hline
Afghanistan & AF \\
Aland Islands & AX \\
Albania    &AL  \\
Algeria   &DZ \\
American Samoa & AS \\
Andorra & AD   \\
Angola & AO \\
\hline
\end{tabular}
\caption{Table, floating element}
\label{table:ta}
\end{wraptable}

\end{multicols}

MulticolumnsEx4OverleafV2.png

 Open this multicols example in an Overleaf LaTeX project


Floats in the multicol package are poorly supported in the current version. Elements inserted with the conventional figure* and table* environments will show up only at the top or bottom of the next page after they are inserted, and will break the layout. The example presented here is a workaround, but you may expect some rough edges. For instance, if the float width is set to \linewidth it causes a weird text overlapping. This said, below is a brief description of the commands:

  • \usepackage{wrapfig}. Put this line in the preamble to import the package wrapfig
  • The environment wrapfigure will insert a figure wrapped in the text. For more information and further examples about this environment see Positioning images and tables.
  • The environment wraptable is the equivalent to wrapfigure but for tables. See Positioning images and tables for more information.

Inserting vertical rulers

A vertical ruler can be inserted as column separator to may improve readability in some documents:

\documentclass{article}
\usepackage{blindtext}
\usepackage{multicol}
\usepackage{color}
\setlength{\columnseprule}{1pt}
\def\columnseprulecolor{\color{blue}}

\begin{document}

\begin{multicols}{3}
[
\section{First Section}
All human things are subject to decay. And when fate summons, Monarchs must obey.
]
Hello, here is some text without a meaning.  This text should show what 
a printed text will look like at this place.

If you read this text, you will get no information.  Really?  Is there 
no information?  Is there.

\columnbreak
\blindtext
This will be in a new column, here is some text without a meaning.  This text 
should show what a printed text will look like at this place.

If you read this text, you will get no information.  Really?  Is there 
no information?  Is there...
\end{multicols}

\blindtext

\end{document}

 Open this multicols example in Overleaf


rule between columns example

If you open this example on Overleaf you will see the column separator can be set to a specific colour also. Below a description of each command:

\usepackage{color}.
This line is inserted in the preamble to enable the use of several colours within the document.
\setlength{\columnseprule}{1pt}
This determines the width of the ruler to be used as column separator, it's set to 0 by default. In the example a column whose width is 1pt is printed.
\def\columnseprulecolor{\color{blue}}
The colour of the separator ruler is set to blue. See the article about using colours in LaTeX for more information on colour manipulation.
\columnbreak
This command inserts a column breakpoint. In this case, the behaviour of the text is different from what you may expect. The column break is inserted, then the paragraphs before the breakpoint are evenly distributed to fill all available space. In the example, the second paragraph is at the bottom of the column and a blank space is inserted in between the second and the first paragraphs.

Further reading

For more information see:

Overleaf guides

LaTeX Basics

Mathematics

Figures and tables

References and Citations

Languages

Document structure

Formatting

Fonts

Presentations

Commands

Field specific

Class files

Advanced TeX/LaTeX